poultergeist 0 Posted March 5, 2011 Report Share Posted March 5, 2011 I wonder if you guys can help me,I'm changing the heater matrix on my Vento. I've got the dash out but it still looks impossible to get to?! Any tips you guys can give me? Link to post Share on other sites
richievr 1 Posted March 5, 2011 Report Share Posted March 5, 2011 need to loosen the metal cross brace and the steering column. then you can pull them forwards enough to get the heater box forwards, then you can get the matrix out upwards... Link to post Share on other sites
engineerrupert 0 Posted March 5, 2011 Report Share Posted March 5, 2011 Mate I did one recently but do not forget if you have air con then you will have to break the circuit as well and there are some hidden bolts on the engine side of the firewall as well. Hope this is of some help to you. Link to post Share on other sites
makster28 0 Posted March 7, 2011 Report Share Posted March 7, 2011 installed new coolant today and took advice from here to leave the cap off with heaters on full bore in the expansion tackle bubles were riising all the time all of my hoses get hot even the matrix ones my temp reads 90 and fans kick in regular but i still have no heat coming in the car also jsut put a new thermostat and new housing in,can anyone shed any light on this,many thanks -------------------------------------------------------------------------------- Link to post Share on other sites
Recommended Posts