michael5556 247 Posted January 27, 2011 Report Share Posted January 27, 2011 I have had a right day fitting my new radiator in, some tw*t had over tightened the bolts on the bumper so had to drill them out, then remove the cross member, two bolts too drill out there, got my new radiator in, in the dark! Put all hoses back on ect, bottom hose is leaking so shall I just replace the hose or cut the end off and tighten it, as I put new clips on but halfords finest.... Says it all.Any advice would be appreciated. Link to post Share on other sites
cabrioman 6 Posted January 27, 2011 Report Share Posted January 27, 2011 depends where the hose is leaking you might be able to cut a bit off the end and sort it that way if not may need a new bottom hose .... Link to post Share on other sites
michael5556 247 Posted January 27, 2011 Author Report Share Posted January 27, 2011 Hose is leaking at the end but just left it running till it warmed up and it has pretty much stopped leaking so will check my drip tray in the morn and will see what the damage is Link to post Share on other sites
Recommended Posts