Jump to content

Recommended Posts

the car does have arb's on it but they are quite small the ones you can buy aftermarket are much beefier and stiffen things up a lot - all the bushes are worth doing mate but if your on a budget worth looking at one of the Bugpack sets for the mk2 as most of the parts are interchangebale and they are a fair bit cheaper

Link to post
Share on other sites

Change all off the bushes on your motor for best results. My car was still running the original bushes. I replaced the lot with powerflex and noticed a huge difference. Felt really tight and the steering was instant. well chuffed!!!

However they are mega expensive.

Also note that if you do decided to replace your bushes you will need to get new bush bolts from VW you cant re-use the old ones.

VR6 golfs are fitted with a 20mm front anti roll bar. Mk2 GTI only fitted with a 18mm so they are not interchangeable.

My complete kit consisted of

20mm front anti roll bar x2

2x front wishbone mounts

2x rear front wishbone mounts

2x rear beam mounting bushes

Link to post
Share on other sites

OEM bushes are made of rubber and have considerable "flex" which some like for comfort. Ploybushes last longer and are more direct with some companies offering different grades of stiffness. You'll probably find a lot of yours are the originals and well past their best.

Link to post
Share on other sites
×
×
  • Create New...