hilla 0 Posted November 14, 2010 Report Share Posted November 14, 2010 guys please help me, last week i fitted new lower control arm bushes, tie rod ends, ball joints, steering rack boots and new brake pads. the only thing that still has to be done is alignment, but when i turn the steering left or right i get a knocking sound and when i drive at 100 - 120km/h the steering vibrate and is very light . i fitted everything myself as i do have some knowledge about mechanichs. i am very stunned because these are new parts, what else should i replace? Link to post Share on other sites
23345matt 0 Posted November 14, 2010 Report Share Posted November 14, 2010 If you camber and tracking is out this may be as a result of that bud. Link to post Share on other sites
smiffy 0 Posted November 14, 2010 Report Share Posted November 14, 2010 check that everythings tight and align the wheels then try again Link to post Share on other sites
djphantom25@hotmail.com 0 Posted November 25, 2010 Report Share Posted November 25, 2010 yeh could well be the tracking buddy Link to post Share on other sites
rav667 0 Posted November 29, 2010 Report Share Posted November 29, 2010 having the same problem, replaced almost al the front suspension including new coil overs, got it wheel aligned and still getting noises. Anyone reccomend a garage in west london or near by that is good, and knows what they are doing when it comes to these things? Link to post Share on other sites
mrhat 0 Posted December 1, 2010 Report Share Posted December 1, 2010 sounds like tracking Link to post Share on other sites
Recommended Posts