jubuzims 0 Posted September 29, 2010 Report Share Posted September 29, 2010 hey guys basically i would like to know if i replace my engine with another( only because i cant find out why mine is pushing the water out) mine is a distrubutor type can i fit a coil pack engine in mine and what if any mods do i need to do? Link to post Share on other sites
legvw 0 Posted September 29, 2010 Report Share Posted September 29, 2010 What do you mean by 'pushing the water out'?You'll probably need a new engine loom if your not staying dissy, so might be easier to keep the early loom/dissy etc and put it on your 'new' engine. Link to post Share on other sites
jubuzims 0 Posted September 29, 2010 Author Report Share Posted September 29, 2010 well 2 months after i bought the car it started mixing oil and water so i replaced the head gasket then 2 months or so later started doing the same thing now i put k seal in there and it has stopped mixing but when the car gets to operating temp the water starts coming out of the expantion tank i have even taken out thermostat and it still does the same thing the other day i took my plugs out and they are black and seems like oil is getting into the chambers so i am just at a loss now so i was thinking about changing the engine because i have my turbo waiting to go on now Link to post Share on other sites
Recommended Posts