Fitting Smacos

[VR6Gill 1]

Hello,

Just need some advise on how to bleed / get water back into the system without air locks and problems once all of the pipes are fitted.

Or do i just need to keep pouring water into the expansion tank and leave the cap off with the engine running until the fans kick in?

Also how much coolant to water do I put in?

Thanks in advance,

Gill.

[cabrioman 6]

fill the cooling system up, put the heaters on full hot, run the engine with the cap off the coolant level will drop then top it up put the cap on and drive it unitl hot keep a bottle of water in the car as the level may drop again ... that should do it mate

[craggsy 91]

I put 4.5 litres of G12++ in then top up with water. Yes leave engine running whilst topping up

[cabrioman 6]

beat ya .... 1-0

[VR6Gill 1]

fill the cooling system up' date=' put the heaters on full hot, run the engine with the cap off the coolant level will drop then top it up put the cap on and drive it unitl hot keep a bottle of water in the car as the level may drop again ... that should do it mate

[/quote']

I thought so... thanks.

Craig thanks for the advise with the coolant.... is that not 1-1???