adam.pah 0 Posted August 25, 2010 Report Share Posted August 25, 2010 Hi guys, have just realised that my rear door wont open from the inside. It opens from the outside fine and locks/unlocks without problem. I have tried moving the child lock switch but this makes no difference. Any ideas before i have to strip it down?? Link to post Share on other sites
thegoth 5 Posted August 25, 2010 Report Share Posted August 25, 2010 Please only start one thread per problem. Someoneone did suggest checking the child lock again, before i moved one the other threads to the trash. Link to post Share on other sites
adam.pah 0 Posted August 25, 2010 Author Report Share Posted August 25, 2010 i've had problems with this site today, hence the double thread! have double, double checked the child lock but no joy. Link to post Share on other sites
adam.pah 0 Posted October 20, 2010 Author Report Share Posted October 20, 2010 Hi guys, still have this problem. Gonna strip it down this week end weather permiting, unless anyone can offer advice??? I've noticed that the lock seems to work a bit slower than the others, don't know if that may have something to do with it. Link to post Share on other sites
KakalakiAkka 0 Posted October 24, 2010 Report Share Posted October 24, 2010 use some wd40 on the door mechanism and on the lock and everything will be o.k. Link to post Share on other sites
KakalakiAkka 0 Posted October 24, 2010 Report Share Posted October 24, 2010 i had the same problem, i've no child lock because of the 2 door, i used some wd40 on the lock, and now it's work perfectly! if you don't have wd40, any oil will do it. perhaps some kind of silicone base oil will be better than vegetable oil. Link to post Share on other sites
Special K 81 0 Posted October 24, 2010 Report Share Posted October 24, 2010 Strip door down if wd40 doesnt do it, it doesnt take long. It could be the wire mech has come off the internal handle or something simple like that good luck Link to post Share on other sites
adam.pah 0 Posted October 25, 2010 Author Report Share Posted October 25, 2010 Thanks guys. Link to post Share on other sites
Recommended Posts