vr6stormt 0 Posted June 5, 2010 Report Share Posted June 5, 2010 can anyone point me in the right direction i need 4 C rings for my fk supersports i dont think the previous owner maintained them so now i need to cut the top rings off and replace them the thread is is in good condition as is the locking C ring but iv`e tried all-sorts with no joy to remove the top one where the spring sits thanks in advance /////????\\\\\ Link to post Share on other sites
b road blaster 0 Posted June 5, 2010 Report Share Posted June 5, 2010 try a bike shop mate as most bikes use the same sort of set up to adjust the rear monoshock on all superbikes i will also check my shed i the morn for you as may have one laying about Link to post Share on other sites
vr6stormt 0 Posted June 5, 2010 Author Report Share Posted June 5, 2010 cheers russ but i need 4 2 front and 2 rear? Link to post Share on other sites
b road blaster 0 Posted June 5, 2010 Report Share Posted June 5, 2010 ah yeah see what you mean now mate can you not get them direct from the manafacture ????? Link to post Share on other sites
b road blaster 0 Posted June 5, 2010 Report Share Posted June 5, 2010 http://www.c2pshocks.com/c2p-suspension/kyb-showa-parts/lock-ring-adjuster-spring you would have to check with them that they are the right size thread http://www.c2pshocks.com/c2p-suspension/wp-parts/wp-lock-ring-spring-adjusteror maybe demon tweeks it seems that fk do spare parts but can only find a usa site http://www.esetuning.com/FK-Automotive-Locking-Ring-for-Highsport-Konigs-p/fkhk002.htm Link to post Share on other sites
legvw 0 Posted June 5, 2010 Report Share Posted June 5, 2010 I think that they might use koni dampers in those kits, you could try them too mate. Link to post Share on other sites
Recommended Posts