poultergeist 0 Posted April 14, 2010 Report Share Posted April 14, 2010 Will 18's fit onto my Vento without any work? If so,will they scrub? Link to post Share on other sites
Dazdub 0 Posted April 14, 2010 Report Share Posted April 14, 2010 18's will fit mate with 215/35 tyres. You will probably need to do some arch work though. Ive seen people who have had to do no arch work and some that have. Will help if you have coilovers so you can play with the ride height. I think 18's look good. A lot of people say that 17 is the biggest you should go but i think its nice to be a little different. Handling may suffer a little bit so it depends if you want show or better handling Link to post Share on other sites
diablocustomz 0 Posted April 15, 2010 Report Share Posted April 15, 2010 Id second that mate, just get the off set right Link to post Share on other sites
Lukey. 381 Posted April 15, 2010 Report Share Posted April 15, 2010 Youd have to find out how much shocker and arch clearance you have to give you a better idea of how much you have to play with.Then you can input your existing wheels offset and the wheels you want and it will tell you how much less clearance you would haveusing this calculator http://www.1010tires.com/WheelOffsetCalculator.asp Link to post Share on other sites
poultergeist 0 Posted April 25, 2010 Author Report Share Posted April 25, 2010 It is sitting on standard suspension with the standard VR6 BBS 15's, the wheels I am looking at are 225/40/18.Is that too big? Link to post Share on other sites
CALICO 130 Posted April 25, 2010 Report Share Posted April 25, 2010 you will need 215/30/18 to be the correct size without recalibrationhttp://www.carbibles.com/tyre_bible_pg4.html Link to post Share on other sites
Recommended Posts