willhouse 0 Posted March 14, 2010 Report Share Posted March 14, 2010 As above, spotted some wheels, and can choose offset (et15-30 odd I think), but ideally I wouldn't want to do any arch work.Any advice appreciated.CheersWill Link to post Share on other sites
sharky_70 0 Posted March 15, 2010 Report Share Posted March 15, 2010 ET30 and use 195/40 tyres and you should be ok Link to post Share on other sites
willhouse 0 Posted March 15, 2010 Author Report Share Posted March 15, 2010 Thanks for that.I was hoping to get 205 40 toyos on there.It hasn't been lowered yet, and a bit of arch work isn't a problem. But I am looking at a koni kit and want to lower it around 40mm.Would getting them as et35 still fit, or will they hit the struts or brakes do you think? Link to post Share on other sites
Lukey. 381 Posted March 16, 2010 Report Share Posted March 16, 2010 The inner clearance would be fine, if anywhere is going to its the outer clearance that would probably foul.From my own experience I have ET35 7.5" wheels with 205/40/17 and they fit under fine with no issue. They scrubbed once and that was with 200kg in the back. compared to my size, ET30 8" wheels would only be 1mm closer to the strut but stick 11mm further out on the arch side Link to post Share on other sites
willhouse 0 Posted March 16, 2010 Author Report Share Posted March 16, 2010 Thanks for the input guys.I have ordered the wheels, et30 17x8.They should hopefully not take too long to machine so I can have them before Elsecar.Cheers for the input.Will Link to post Share on other sites
sharky_70 0 Posted March 17, 2010 Report Share Posted March 17, 2010 195/40 tyres and youll be fine Link to post Share on other sites
Recommended Posts