shail 0 Posted January 31, 2010 Report Share Posted January 31, 2010 I've got a leak on my rear FK Automotive lights. I removed them, and added an extra layer of foam, but they still leak.Couple of questions:1. What can I use to seal them better (currently using some draft excluder foam). 2. If you dropped your spanner down the side of the boot on the drivers side, between the inner skin and outer skin, near the rear lights, how would you get the spanner out? Link to post Share on other sites
caretaker 0 Posted February 2, 2010 Report Share Posted February 2, 2010 I just bought some oem foam seals for the rear lights from the dealer for 6 quid each mate, try there first! Link to post Share on other sites
Bigjobbo 0 Posted February 2, 2010 Report Share Posted February 2, 2010 A flexi magnet for the spanner, and dum dum for the lamp seals. Link to post Share on other sites
shail 0 Posted February 2, 2010 Author Report Share Posted February 2, 2010 Cheers, didn't realise you could buy the seals from VW. I think I'll just do that instead of trying to seal again.I tired getting the spanner out tonight with a magnet attached to a coat hanger. No luck, as I can't see or tell where it is! Link to post Share on other sites
Recommended Posts