tpog60 0 Posted December 25, 2009 Report Share Posted December 25, 2009 Hey people, iam new to the vr game, brought a mk3 vr6 fitted a new clutch, went to put it in reverse and got 1st, had to go really far over to the left to get reverese....all the gears feel to far to the left, can the gear linkage be setup again / bush repair kit etc....any help would be great as i cant really drive it.... i can get all the gears just in the rong place.rob Link to post Share on other sites
Scott 0 Posted February 10, 2010 Report Share Posted February 10, 2010 a guide i saw said to figure out where 3rd is, put the box in 3rd from the box end - then slacken the shifter bolts and it will jump to the correct position, then tighten up again and try it. Link to post Share on other sites
vr6stormt 0 Posted February 10, 2010 Report Share Posted February 10, 2010 there is a couple of holes under the gearstick gaitor that you can slide a screwdriver or drill bit in to centre it all up Link to post Share on other sites
Recommended Posts