spuds_own 3 Posted December 1, 2009 Report Share Posted December 1, 2009 has anyone done a how to? ive looked everywhere!!im just getting that fed up of trying to fix it im just going to remove it!! any help would be appreciated i know i will need a bias valve and to re pipe all the brakes but i was wondering if there were any other issues to contend with?thanks in advancestew Link to post Share on other sites
VR6Nat 9 Posted December 1, 2009 Report Share Posted December 1, 2009 i take it you have a friendly MOT tester yeah? cuz it wont go through without abs... Link to post Share on other sites
spuds_own 3 Posted December 1, 2009 Author Report Share Posted December 1, 2009 From what i understand if the pump and ecu have been removed and there is a way of compensating the rear brakes (ie bias valve) and the pipes have been re routed to suit not having abs then there will be no problem with an mot.I have removed it on cars i have previously owned for track use and never had an issue with MOT tests.the main thing i want to know is will it cause issues with the ECU for the engine or wiring with it being removed? Link to post Share on other sites
legvw 0 Posted December 1, 2009 Report Share Posted December 1, 2009 Shouldn't cause any issues, as long as its completely removed, pump, ecu, wiring loom, sensors, the lot! Link to post Share on other sites
spuds_own 3 Posted December 2, 2009 Author Report Share Posted December 2, 2009 thats what i needed to know cheers Link to post Share on other sites
Recommended Posts