bryhp 0 Posted October 27, 2009 Report Share Posted October 27, 2009 I everyone hope someone can help. I have a 1996 VR6 5 door which i have been restoring after it lay for a year.Problem is i have just fitted a JOM Suspension kit which was suposed to be 50mm lower at the front and 30mm at the rear. Problem is it is rubbing on arches and rear suspension lower plates. I have 16" alloys wrapped in 205 55 16 tyres to be honest i dont think these are the standard alloys? I have fitted a 9.5mm spacer on rears to avoid it contacting bottom suspension plates but not sure if i can keep 16s as the tyres disappear into arch its that low!!!Has anyone put this kit on there vr and what offset and tyre size are used or recommended?Any help greatly appreciatedBrian Link to post Share on other sites
craggsy 91 Posted October 27, 2009 Report Share Posted October 27, 2009 Wrong tyres mate....195/45 16s or 205/45 16s really needed Link to post Share on other sites
Recommended Posts