jaminvr6 0 Posted October 12, 2009 Report Share Posted October 12, 2009 want to get a manifold polished or powder coated i have seen some people put the 2.9 manifold on is it worth doing ?what will it do for my car ?what will i need manifold and throttle body ?also do they have part numbers on them so i can tell there from a 2.9 ?cheers ben Link to post Share on other sites
vr6binks 0 Posted October 12, 2009 Report Share Posted October 12, 2009 i put a 2.9 inlet manifold on my obd1 but i fitted a 6 branch and de-cat pipe at the same time, i can notice the difference it revs out a lot quicker. there is a tread on here which shows you the differences between the 2.8 and 2.9 manifolds ! Link to post Share on other sites
VR6Pete 1,455 Posted October 12, 2009 Report Share Posted October 12, 2009 Your throttle body wont fit on an ob1 manifold if you are an OBD2. If you are OBD1, then you can in theory fit the manifold.... Link to post Share on other sites
jaminvr6 0 Posted October 13, 2009 Author Report Share Posted October 13, 2009 mine is a 0bd1 mate when you fitted yours did you have to fit the trottle body do they have part numbers ? Link to post Share on other sites
jaminvr6 0 Posted October 20, 2009 Author Report Share Posted October 20, 2009 ?any one shine some light on this ?is all i need is a 2.9 manifold and throttle body ?do you need the lower bit of the manifold from the 2.9 or are they the same Link to post Share on other sites
Recommended Posts