goonersteve 0 Posted July 17, 2009 Report Share Posted July 17, 2009 I'm getting a Rotrex 'charger fitted next weekend, along with 263 cams. The guy I am buying the 'charger off knows what he is doing and is very kindly fitting it for me and has given me plenty of advice / guidance on what I need. But I just wanted to check for any extra bits I may need or want to get the best from the set up.One thing i'm considering is a Walbro fuel pump. Any ideas of best place to get this and cost? Also, would that need fitting before re-map or does it not matter?Any other ideas / advice would be very much appreciated.Cheers,-Steve Link to post Share on other sites
craggsy 91 Posted July 17, 2009 Report Share Posted July 17, 2009 You doing headgasket at same time Steve or doing that later?Coz I cant find the part number for headgasket, receipt should be in car still I hope.If you are get ARPs mate as they are reusable Link to post Share on other sites
goonersteve 0 Posted July 17, 2009 Author Report Share Posted July 17, 2009 Will be doing both those i reckon, but not until after. So no rush mate, just give it to me as and when. Link to post Share on other sites
craggsy 91 Posted July 17, 2009 Report Share Posted July 17, 2009 OK matey Link to post Share on other sites
rodney 17 Posted July 17, 2009 Report Share Posted July 17, 2009 yeah fuel needs to be done before the remap otherwise you could end up over pressure/ worst case..worth having some engine cleaner or the likes to make it/the bay look pretttttyyyyy Link to post Share on other sites
goonersteve 0 Posted July 20, 2009 Author Report Share Posted July 20, 2009 Ok thanks. Anyone know of best place to get one (Walbro)? Link to post Share on other sites
jims13 6 Posted July 20, 2009 Report Share Posted July 20, 2009 got ,ine form storm.. cost 99 + postage i think.ho you fuelling it ? remap or fmu method.. ?? Link to post Share on other sites
goonersteve 0 Posted July 20, 2009 Author Report Share Posted July 20, 2009 Gonna be re-mapped at Storm. So may as well get it from them, assuming that's about the going price? Link to post Share on other sites
rodney 17 Posted July 20, 2009 Report Share Posted July 20, 2009 you can leave the high flow injectors out until the remap. cuts sown on the over fueling issue. so don't boot it until its mapped/run in ...Worth double checking your Lambda and Plugs are all good/new before the remap. Link to post Share on other sites
craggsy 91 Posted July 20, 2009 Report Share Posted July 20, 2009 Yes id agree with lambda as mines on its last legs now, and the plugs that Storm recomended me Steve are BOSCH F5DPOR. Makes sure your leads and coilpack are fine as it all goes towards it running spot on Link to post Share on other sites
craggsy 91 Posted July 20, 2009 Report Share Posted July 20, 2009 Or dizzy as I cant remember what yours is Link to post Share on other sites
Recommended Posts