DanH 1 Posted July 4, 2009 Report Share Posted July 4, 2009 no.1...... someone on here used a drain plug off of a polo i think, it used an allen key so didnt poke out as much as the standard bolt one...but i cant be sure wot it was...was it a polo? which engine/year? i want one cos mine ground to f*ck!! no.2.....found my oil leak, its dripping off the bottom of the cooler. robbed a pic off of annavr6's rebuild for this lolive never taken this off so wots behind it? im assuming i undo that bolt in middle, it comes away from the block, fit a new o ring between the block and it and bolt it back on....is this correct? will it fix the leak? only leaks when engines runner and its pretty bad. thanks, dan Link to post Share on other sites
thegoth 5 Posted July 4, 2009 Report Share Posted July 4, 2009 2) there are two seals, one between the cooler and the block the other under the p'ixie hat'. I'd replace both. Link to post Share on other sites
DanH 1 Posted July 4, 2009 Author Report Share Posted July 4, 2009 nice 1, will be onto gsf later then! Link to post Share on other sites
DanH 1 Posted July 4, 2009 Author Report Share Posted July 4, 2009 https://secure.gsfcarparts.com/shop/results.aspcant c it there, or am i being blind... best off ringing them i think Link to post Share on other sites
thegoth 5 Posted July 4, 2009 Report Share Posted July 4, 2009 one is round in cross section, the other square Link to post Share on other sites
DanH 1 Posted July 4, 2009 Author Report Share Posted July 4, 2009 excellent, thanks! Link to post Share on other sites
Recommended Posts