vr6_blu 0 Posted June 24, 2009 Report Share Posted June 24, 2009 HI I havent had my VR6 to long but its fitted with a POWER FLOW rear back box which sounds really nice,problem is the center piece is blowing along with the silencer the bit back from the back box if you get my drift lol.Question is I found a nice second hand one in good condition and cheap but its of a mk3 gti would it still fit or are they differnt bore size thanks....... Link to post Share on other sites
russj249 2 Posted June 24, 2009 Report Share Posted June 24, 2009 You might have to measure the external and internal diameter to double check.Reason being is when I had my power flow one made instead of the scorpion one I had on, they gave me about 3 different size pipes to choose from. I can't remember which ones they were.At worst scenario, and depending where you are in Brum. There's a place by me called K'ford Tyres and they have equipment to flare out pipe and can quite easily get it to fit. (other places who do custom exhausts should have the flaring tools too)Hope this helps Link to post Share on other sites
vr6_blu 0 Posted June 25, 2009 Author Report Share Posted June 25, 2009 Thanks for the reply m8 I managed to track a good second hand vr6 genuine vw one off a car that was being broken for £40 bargain I thought but thanks again for the replys....nice VR to m8 ;0) Link to post Share on other sites
Recommended Posts