craggsy 91 Posted April 20, 2009 Report Share Posted April 20, 2009 Does anyone have any pics of the rotrex charger in situ. I have some pics but not quite showing everything. Need to start planning how its gonna go in and where. Seems easy enough looking at all bits tho' Link to post Share on other sites
Ben Seabrook 4 Posted April 23, 2009 Report Share Posted April 23, 2009 found one mate not the best but gives you an idea Link to post Share on other sites
craggsy 91 Posted April 23, 2009 Author Report Share Posted April 23, 2009 Have seen that one Ben but thanks.Johnno83 sent me fitting details with pics so have a very good idea now Link to post Share on other sites
Ben Seabrook 4 Posted April 23, 2009 Report Share Posted April 23, 2009 No worries when Jim and I (well mainly Jim ) put mine in we didn't have any instructions put once you lay it out it becomes pretty obvious that there is only one way it can go !! Link to post Share on other sites
craggsy 91 Posted April 23, 2009 Author Report Share Posted April 23, 2009 I just couldnt work out where MAF went.....now I know where it will sit....where carbon canister was Link to post Share on other sites
Ben Seabrook 4 Posted April 23, 2009 Report Share Posted April 23, 2009 yeah was a bit concerned when Jim attacked my carbon canister with a screwdriver and out it came !!! now I know a bit more it's less so !! Link to post Share on other sites
craggsy 91 Posted April 23, 2009 Author Report Share Posted April 23, 2009 Might see if I can use BMC CDA.......doubt it tho Link to post Share on other sites
Ben Seabrook 4 Posted April 23, 2009 Report Share Posted April 23, 2009 yeah I was thinking the same but would be tricky I think for me - might borrow someones at a show to see if I can make it fit before forking out on one - ok for you as you already have one !! Link to post Share on other sites
sparkz 0 Posted April 23, 2009 Report Share Posted April 23, 2009 Ben..out of interest, what you doing with your z charger?? Link to post Share on other sites
Charged VR 0 Posted April 23, 2009 Report Share Posted April 23, 2009 Hello, Hope these help Link to post Share on other sites
craggsy 91 Posted April 23, 2009 Author Report Share Posted April 23, 2009 cool top man Link to post Share on other sites
Charged VR 0 Posted April 23, 2009 Report Share Posted April 23, 2009 No Problem,Just remember to get the belt routing correct and the charger turning the right way and the charger fluid feed pipe bled. Andy and Miles will explain Link to post Share on other sites
Ben Seabrook 4 Posted April 23, 2009 Report Share Posted April 23, 2009 Ben..out of interest' date=' what you doing with your z charger??[/quote']thread hijack sorry Craig !! got a few little bits going on 6 branch de cat ported head etc and trying to work out pulley sizes to get the 9 psi that I need in my life !!! only running 5 at the moment but making 265bhp so not too bad but need more !! any ideas ?? can pm you the pulley sizes for you to have a look and give me some advice - might help Kevin when he fancies some more power Link to post Share on other sites
craggsy 91 Posted April 23, 2009 Author Report Share Posted April 23, 2009 Ben..out of interest' date=' what you doing with your z charger??[/quote']thread hijack sorry Craig !! got a few little bits going on 6 branch de cat ported head etc and trying to work out pulley sizes to get the 9 psi that I need in my life !!! only running 5 at the moment but making 265bhp so not too bad but need more !! any ideas ?? can pm you the pulley sizes for you to have a look and give me some advice - might help Kevin when he fancies some more power OI!!!!!!!!! Go get your own thread....lol Link to post Share on other sites
Recommended Posts