dino190 0 Posted April 17, 2009 Report Share Posted April 17, 2009 hello folks, need your help please. have an oil leak on the right side of the engine, underneath the water pump pulley. There is a plug on the side of the oil gallery that appears to have corroded and oil is seeping or spraying out. It is a nightmare to get to, and I am having a problem obtaining the correct replacement part. Any advice please on the correct part number, and also how to change it without taking engine out? It is a corrado VR6 engine, 94, 120k miles. Thanks. Link to post Share on other sites
ingham 5 Posted April 17, 2009 Report Share Posted April 17, 2009 any pics? Link to post Share on other sites
dino190 0 Posted April 23, 2009 Author Report Share Posted April 23, 2009 really difficult to get pictures, will try the next time it is on the ramp. It is below and just offset to one side underneath the water pump pulley. It doesnt show up on the engine schematic, there are two plugs just above it on the schematic, but i dont think it is eiither one of them, it appears to be 12mm but the only one vag can come up with is a 10mm, the next size up being 36mm i think. without getting the right fit, the oil simply seeps out. help!! Link to post Share on other sites
Recommended Posts