VR6_Jim 0 Posted April 15, 2009 Report Share Posted April 15, 2009 i need to change my rear axle this weekend cos the kurb jumped out and bent it. but thats another story. So anyway just wandered if any1 had a plan or any tips 4 changing the axle and also torque settings. Cheers guys. Jim Link to post Share on other sites
VR6_Jim 0 Posted April 16, 2009 Author Report Share Posted April 16, 2009 any1 got any ideas? Link to post Share on other sites
VR6_Jim 0 Posted April 17, 2009 Author Report Share Posted April 17, 2009 Any1? Link to post Share on other sites
legvw 0 Posted April 17, 2009 Report Share Posted April 17, 2009 Don,t know any torque settings, just tight i suppose!!Just be careful un-doing to brake lines as they tend to go rusty, and i think its easier to drop the axle first, then un-do the bottoms of the dampers. Then do the reverse to re-fit. It makes life easier because they will support the axle so you can get a jack under the axle to fit the bolts.Its been a while since i took mine off, but i think thats it!Good luck Link to post Share on other sites
Recommended Posts