ChudsMeister 0 Posted April 6, 2009 Report Share Posted April 6, 2009 Looking for your help My Vr failed today for a Brake load sensing valve linkage seized.I've had a look underneath the car but I'm not quite sure what I'm looking for. Don't want to try and un-seize something thats not supposed to..Your help is appreciatedRich Link to post Share on other sites
craggsy 91 Posted April 6, 2009 Report Share Posted April 6, 2009 LOL...mine failed on excessive play in rear bearing and pesky ABS light on. Nipped up bearing and i'll clear code tomorrow Link to post Share on other sites
SankysVR6 1 Posted April 7, 2009 Report Share Posted April 7, 2009 I think its on the rear axle, try doing a search for the brake bias valve. Link to post Share on other sites
legvw 0 Posted April 7, 2009 Report Share Posted April 7, 2009 it should be on your rear beam, and have 4 brake pipes going into it.not sure how you un-sieze them, maybe a good sqiurt of wd40-or similar, and move the arm in and out to un-seize the little plunger under the arm.its not as complicated as i`ve described, sorry!!let us know how you get on ;-) Link to post Share on other sites
ChudsMeister 0 Posted April 7, 2009 Author Report Share Posted April 7, 2009 Thanks for the advice, managed to get it freed up with a lot of WD40. Just need to get it back for the re-test now.Rich Link to post Share on other sites
Recommended Posts