mark_rooney 0 Posted March 26, 2009 Report Share Posted March 26, 2009 Ok year 92 engine, the water temp guage starts of ok after about 5 minutes its on 90 degree but then after about 30 minutes it starts rising and did max out as far right as possible but no water loss or steam....Any ideas?? Link to post Share on other sites
krave 0 Posted March 26, 2009 Report Share Posted March 26, 2009 Thermostat? Link to post Share on other sites
cabrioman 6 Posted March 26, 2009 Report Share Posted March 26, 2009 are the fan cutting in ???? Link to post Share on other sites
mark_rooney 0 Posted March 26, 2009 Author Report Share Posted March 26, 2009 both top and bottom hose are getting hot and the fan is kicking in however not sure if the 2nd speed is kicking in Link to post Share on other sites
cabrioman 6 Posted March 26, 2009 Report Share Posted March 26, 2009 is there water coming out the small hose to the expansion tank when the engine is running ??? there should be if not could be the water pump gone for a burton Link to post Share on other sites
krave 0 Posted March 26, 2009 Report Share Posted March 26, 2009 If it is, hads your coolent been changed recently at all. Maybe air lock. Link to post Share on other sites
mark_rooney 0 Posted March 28, 2009 Author Report Share Posted March 28, 2009 the coolant hasnt been changed recently, the water pump has just been changed about 7 months ago Link to post Share on other sites
mark_rooney 0 Posted March 28, 2009 Author Report Share Posted March 28, 2009 ok, today i changed the thermostat for a 80 degree and also flushed the water system through and replaced it with new g12 plus some water, according to the guage the stat isnt letting by untill 90 degree and the fan kicks in just after 110 and of at 100, any advise?? Link to post Share on other sites
Recommended Posts