vrclaire 0 Posted January 12, 2009 Report Share Posted January 12, 2009 I have a problem with my temperture Gauge it has stopped working?Since I have replaced my water housing and two sensors the gauge has stopped working, used to work before it was changed.So I have just replaced my wiring Loom as mine was not in good condition, thinking could have a broken wire, but doesnt seem the case as temp gauge still not working?Any Ideas off what else it could be or i have missed would be appreciated.thanksClaire Link to post Share on other sites
cabrioman 6 Posted January 12, 2009 Report Share Posted January 12, 2009 are you sure the new wiring is in good condition no broken wires etc ... all plugged in fully??? Link to post Share on other sites
vrclaire 0 Posted January 13, 2009 Author Report Share Posted January 13, 2009 are you sure the new wiring is in good condition no broken wires etc ... all plugged in fully???Good question, but the reason I changed the Loom was because the old Loom had broken wires and this one looked in better health, Would the Thermostat have anything to do with guage not working?.... Link to post Share on other sites
Recommended Posts