mashed 0 Posted December 8, 2008 Report Share Posted December 8, 2008 Hi Guys, I have just completed a VR6 Swap, and their seems to be a problem, As when it starts it's fine, But it won't stop! You have to unhook the battery and then try starting again to stop it, Does anybody have any ideas?And also i have a couple of spare wires? A green with Black tracer and a yellow.....Thanks in advance,Brad Link to post Share on other sites
pontygtimk2 0 Posted December 14, 2008 Report Share Posted December 14, 2008 Are ypu using ABS as the cables that are free maybe from the ABS on the mk3 also check your relays are good espically the 109 other than that your ecu could be bad Link to post Share on other sites
rodney 17 Posted December 15, 2008 Report Share Posted December 15, 2008 also check you have all terminations into the ignition circuits. think of it as you need to switch it on and off... (electrically) Link to post Share on other sites
Smuggler 0 Posted January 10, 2009 Report Share Posted January 10, 2009 Do you have your alternator connector plugged in, the one which shows the battery warning light on the dash?Also did you remove/refit he alternator charging lead, are you certain its in the right place? Link to post Share on other sites
Recommended Posts