krave 0 Posted April 25, 2008 Report Share Posted April 25, 2008 Hey coming to my last ? lol. I have sourced a m reg vr6 with a good body and was wondering would my engine (a 96 p reg) go straight in? is there any difference in body or any thing, i.e brakes, air bags, loom etc. I dont want to be getting a shell that doesnt have the same extra's as mine (especially passenger air bag)Thanks again Link to post Share on other sites
jesterwalker69 0 Posted April 25, 2008 Report Share Posted April 25, 2008 Front brakes will be smaller if the original engine was from an OBD2 car.M Reg is OBD1 therefore running 280mm brakes not 288mm the OBD2 runs.... But for £50 i could sell you a complete OBD2 288mm front brake set up! Link to post Share on other sites
krave 0 Posted April 25, 2008 Author Report Share Posted April 25, 2008 lol, i have a complete obd 2 car, would be using this as a donor car (chassis twisted). So have everything i could need. The loom would be the same wouldnt it? so would it just be a case of the engine would plug into the existing loom. Maybe with just some adapting, and without having to swap entire loom through the interior? Link to post Share on other sites
Recommended Posts