juliet 0 Posted April 23, 2008 Report Share Posted April 23, 2008 Along with all the other probs with my car at the moment heres a little one when i switch on the ignition and the lights come on in the multi function display window / Mileage befor the milage pops up a small message appears it flashes O2in or maybe its InO2 what does this mean and is it something that could be causing my hesitation under load. New lambda sensor fitted and working ok, reson for Knowing its working car went from doing 13 to 16 MPG to Now doing 26 to 30 MPG once i had rewired the sensoe#r back in. The only bit i couldnt get to work was the signal wire to the heater side of the sensor, so i simply wired this in with a relay and fuse from a live that comes on when ignition swiched on. If any one could point me in the dircrtion of some sort of wiring diagram for my car i might be able to sort out why the original wires have no voltage on them. ThanksHomer Link to post Share on other sites
VR6Pete 1,455 Posted April 23, 2008 Report Share Posted April 23, 2008 That is your service interval codes, there is a guide in the premium members knowledge vault that shows you how to reset them if it has been serviced which reminds me that I need to do mine - I think IN02 is the big service too.Pete Link to post Share on other sites
Recommended Posts