craggsy 91 Posted January 29, 2008 Report Share Posted January 29, 2008 Rightt i've ordered some ARBs and was after any hints and tips and whether its possible to fit these on a driveway with jack and axle stands.Any help and tips greatfully received Link to post Share on other sites
vr6 g3 0 Posted January 31, 2008 Report Share Posted January 31, 2008 I did mine on the drive drive with axle stands it wasn't a bad job at all, the rear is easy, the front you just drop the rear subframe mount bolts and prise the anti-roll bar out.Well worth doing i'd say. Link to post Share on other sites
craggsy 91 Posted February 1, 2008 Author Report Share Posted February 1, 2008 Why don't Eibach supply ARB link bushes you know the ones at end of ARBs........more money to spend on getting them Link to post Share on other sites
xyber 1 Posted February 1, 2008 Report Share Posted February 1, 2008 one of those jobs I keep meaning to do, fancy posting a guide with pics craggsy as you work through it? oh and where did you get your from? Link to post Share on other sites
craggsy 91 Posted February 1, 2008 Author Report Share Posted February 1, 2008 I will try and do a guide as I cant find one anywhere. plenty on mk2s tho.I got mine on Ebay from Gwent VW £259 delivered Link to post Share on other sites
xyber 1 Posted February 1, 2008 Report Share Posted February 1, 2008 nice one thanks Link to post Share on other sites
craggsy 91 Posted February 1, 2008 Author Report Share Posted February 1, 2008 Don't actually need arb link bushes as the VR setup is different......the link goes in the end of the ARB Link to post Share on other sites
Recommended Posts