Philly-R6 28 Posted January 3, 2008 Report Share Posted January 3, 2008 Hi all,My 1995 Corrado VR6 has a problem with its heated seats.The passenger seat works just fine, but the drivers seat does not warm up at all.I swapped the seats over and the passenger seat still works when connected to the drivers side loom: so the problem is in the drivers seat.I checked the wiring on the seat and both elements appear fine - there is a small resistance measured across each element. However the wiring to (what I guess is) the temperature sensor is open circuit. On the passenger seat this measured a high resistance - around 30 Mega Ohm.I've been to VW and the heated element is now obsolete. The temperature sensor is part of the base element and not a separate part.So, can anyone help me with any of my questions below?1) Where can I source a replacement element (part number 535 963 555A)?2) Where can I get information on the sensor component, so I can replace it myself?3) Does anyone happen to know the original manufacturer of the elements, so I can approach them for information?Cheers Link to post Share on other sites
Recommended Posts