jezmoz 0 Posted August 5, 2007 Report Share Posted August 5, 2007 My engine is a gonner can anyone tell me what's needed for this transplant please Link to post Share on other sites
Focker-out 0 Posted August 5, 2007 Report Share Posted August 5, 2007 Money, lots of it!!!!!I looked at doing this to mine, depends on how you approach it, standalone or original ECU, Standalone is probably easier, plug and play, if not you will need the engine loom, ecu, throttle pedal, custom down pipe, and thats just the beginningToo much hassle for me so i bought an R32 instead Link to post Share on other sites
jezmoz 0 Posted August 5, 2007 Author Report Share Posted August 5, 2007 standalone? will an r32 lump run on the vr6 loom and ecu if mapped? Link to post Share on other sites
Focker-out 0 Posted August 7, 2007 Report Share Posted August 7, 2007 No it wont, not a hope in hell, Lots more to this than dropping in an engine, i have gone to fair extremes with bits of mine, this conversion however pushed the boundaries that bit too far.Storm developments have done a mk2 as have JBS Link to post Share on other sites
Recommended Posts