Guest 96vtecI4 Posted March 25, 2007 Report Share Posted March 25, 2007 Hey guys, new to the site. I actually don't own a VR6, but my little sister does. I'm actually a honda guy (sorry in advance lol). She's got some issues with it and I haven't had time to take a look at it since i'm in the middle of my turbo proj. Anyways to the point, her washer fluid isn't working, I originally thought it was a loose or shorted wire, but when you hit the spray button you can hear the power up. So now I think it may be the fluid pump, I have a spare so I was thinking if i could get to it i could swap it out, so now I need a walk through on how to get the bumper off. Where are all the bolts? Any help would be greatly appriciated! Thanks in advance. Link to post Share on other sites
rodney 17 Posted March 25, 2007 Report Share Posted March 25, 2007 Pop the grill off -- Some take headlights out tho not always necessary depends on what you are trying to access. Then you will see the top bolts on the bumber. There are a couple disconnections required under near lamps etc.. and then the damned stupid wheel well clips. in the wheel well you can see on the outer edge some little black plastic do-hickies. the centre needs to be pushed through - DO NOT LOOSE THEM! once done a little manipulation and off it will click, Do not force it too much. Black plastic do-hickies in reverse put the thumbtack in then push the black centres in. Only a 2 min job just take your time and quite easy really. I hate it Link to post Share on other sites
Buzzark 0 Posted March 25, 2007 Report Share Posted March 25, 2007 Thanks RCF, that's helped me too! I want to pull my front wings to check for rust behind and was wondering how to get the bumper off first. Link to post Share on other sites
Guest 96vtecI4 Posted March 25, 2007 Report Share Posted March 25, 2007 ok great thanks! Link to post Share on other sites
Recommended Posts