jeggy 0 Posted February 4, 2007 Report Share Posted February 4, 2007 Hi there how you doing bought a full hose kit and have 2 hoses left any ideas where they go thanks again Link to post Share on other sites
thegoth 5 Posted February 4, 2007 Report Share Posted February 4, 2007 The short one would replace a breather pipe from the cam cover to air intake. I wouldn't bother as it's supposed to have a oil trap. The other is also not a coolant pipe. On mine it would go along side the ISV silencer, near the throttle body.TG Link to post Share on other sites
jeggy 0 Posted February 4, 2007 Author Report Share Posted February 4, 2007 hi there i have an obd2 car would this still all connect up so i take it i only put in the longer pipe Link to post Share on other sites
richievr 1 Posted February 4, 2007 Report Share Posted February 4, 2007 you wont need the longer one on an obd2 car is it has no isv to connect it to! and as goth said above - the "s" shaped one i wouldn't use as it should have an oil trap in it... Link to post Share on other sites
Recommended Posts