ChudsMeister 0 Posted November 19, 2006 Report Share Posted November 19, 2006 I finally got myself a minted VR6 But a couple of things I have noticed are :The previous owner had the car as a show car polished engine bay and minimal fittings eg. removed washer bottle.Anyway I'll get to the point, he had fitted an induction kit and he had removed what I think was a charcoal filter (correct me if I'm wrong). I want to put the car back to original for the winter as its running lumpy in this cold weather. There is two pipes that should come from the top of the charcoal filter but I don't have the correct fittings as previous owner cut the pipes (pipes now open blowing out in to the air) therfore I'm getting a very strong smell of fumes in the car. Does anyone know what the pipe connections are called and where I could buy new ones and does this sound like where my fuel/fume smell is where the problem is at.Much appreciatedRichie Link to post Share on other sites
mk3anni 0 Posted November 19, 2006 Report Share Posted November 19, 2006 Just leave themIt serves no purpose.run the clear pipe into the wing, block the black pipe off. Link to post Share on other sites
purple highline monster 0 Posted November 19, 2006 Report Share Posted November 19, 2006 or go to a scrappy and find the bits you need, they wont want much for that sort of stuff as its toot to them Link to post Share on other sites
Recommended Posts