Hi guys , I finally managed to gather a set of used window mechanism motors I bench tested the motors using a diagram I found on the net ,they all work 100% . I installed them and connected them up the switch and motor is getting 12v but wen I hit the switch nothing happens , I noticed that non of the switches light up , could all the switches be broken or is it something else plz help
Did you get this fixed in the end? I had a similar problem where i knew for a fact my windows worked but didn't budge with the switches. Turned out fuse 14 was blown to bits and that solved it. There is also a thermal fuse for the windows right at the top of the fuse box (you'll need to drop the fuse box down, it had a green top on mine in an aluminium casing), swap it out with a regular fuse and try it then to check that isnt stopping the motors turning.
Obd1 vr6 power windows not working
in I.C.E, Security an Electrical
Posted
Did you get this fixed in the end? I had a similar problem where i knew for a fact my windows worked but didn't budge with the switches. Turned out fuse 14 was blown to bits and that solved it. There is also a thermal fuse for the windows right at the top of the fuse box (you'll need to drop the fuse box down, it had a green top on mine in an aluminium casing), swap it out with a regular fuse and try it then to check that isnt stopping the motors turning.