-
Content Count
31 -
Joined
-
Last visited
Content Type
VR6OC News
Website Content
Profiles
Forums
Calendar
Gallery
Store
Collections
Community Map
Posts posted by Mk3Jake
-
-
Hello people, need some help with regards to fitting a intercooler to my vr6, from what i know the supercharger is a z engineering...looks like the old style. what route would you guys take when piping for a intercooler as coming out of the charger and going past the throttle body through the intercooler and back past the charger seems a tad tight...any help or diagrams would be appreciated.
thanks in advance
jake
-
I did what you guys said and put the maf between the air filter and the charger and it ran really rich, also was juddering on normal speeds and would barely start, changed it back around and runs perfect?! Is this because the car was mapped with the maf after the sc? Thanks
-
I see, is there any reson for that?! Also if my car was mapped with the maf sensor boost side would it be wise to put it intake side? Thanks
-
Hey Guys, Got a question about intake pipes, been looking around and the only one i can find is the bonrath power rohr, alot of other cars seem to have one continuous pipe from throttle body to supercharger, what do you do with the maf sensor ? are these just home made pipes?
thanks
-
i grabbed a bargain with my charger i think, z engineering, stage 1 setup, mapped ecu and fitted for £1500 :~)
-
Well I Have Them 4 Bits Of Angle Just Sitting It In Place But I Have A Proper Battery Box To Sit Over It Which WIll Be Bolted Down Aswell
-
seats look very nice mate what are they ? have you got a cover for the battery - would look neater with a mk4 cover or something similar over the top
Thank You For The Comment, I Do Have A Battery Cover, Currently Being Powdercoated Black With Yellow VW Symbol
The Seats Are From Raceland Mate, Very Cheap And The Quality Seems Good....
More Updates Soon
-
Thank You For The Comments, The Badges Arent Quite As Bright A They Look In The Photo, But I Think Adds A Nice Touch To Make The Car Stand Out...
Quick Update, Recieved My Seats And Harnesses A Couple Days Ago, Just Waiting On Subframes And Gliders Till I Can Fit Them...
I Also Have Nearly Finished The Rear Of The Car, Still Waiting On Strut Braces To Turn Up
I Now Have A 4 Point Cage Which I Am Having Sprayed And Installed...
Any Comments Would Be Much Appreciated
-
Just reading this thread, i currently have air con but was thinking about stripping it all out, so what ever parts you need could be up for sell.
just need some advice on how hard the job is to remove everything.
thanks
-
What Cage And Price Mate? Pictures??
Thank You For The Comments Mate....
-
Little Update, Recieved My Seats Today
Really Happy With The Look And Feel Of Them, Also Finished My Boot, Went For A Suede Fabric In The End, Will Post Pictures Of It Up Tommorrow
-
Hey guys, received my harnesses today, got the rear strap on the rear seat belt mounts. What have you guys used to do both the side straps, any help or pictures will be appreciated
-
We Have A Few People Staying In The Telford Shawbirch Travellodge And Now Some People Been Told Its Fully Booked, If You Guys Are Staying There Then The Car Park Is Going To Look Amazing...
-
I Have Had A Look Under My Bonnet And Noticed That I Do Have A Spark From One Of The Leads, Fingers Crossed This Is The Problem.
Will This Be Causing Any Harm To The Engine??
New Leads To Be Ordered I Guess...
Thanks For All The Help
-
Exactly The Same As Me Buddy.
Thanks For Any Help...
-
Hey Guys, I Have A Slight Problem With The Vr At The Moment, If Im In Third Gear And Change Down Into 2nd, Revs Sitting Aorund 2k, If I Then Put My Foot Down The Car With Judder/Hold Back For A Second Before Picking Up Around 2500k, This Is The Case For Most Gears.
Any Help WIll Be Much Appreciated, Thanks
Jake
-
Thank For The Info On The AIr Intakes, Much Appreciated
-
Little Update - Gave Her A Little Clean And Took Some Pictures Of The Damage, Nothing Major But Just Annoying Really...
Took Some Pictures Of How The Back Stands At The Moment, Waiting For Carpet To Arrive, The Holes Were Going To Be For The Harnesses But Might Be Having Them on Either The Strut Brace Or The Cage Now?? Ideas??
I Have Also Ordered Myself Some New Bits...
A BMC CDA Induction Kit
Some New Leather Reclining Seats With Harness Holes
The Strut Brace Still Hasnt Turned Up
-
Loving This Car, Alot Of Subtle Mods But Really Works...
On Your Front Bumper Below The Indicators And Fogs Is Like A Air Intake?? Where Was That From Mate??
-
Heya Guys, I Havent Really Done Any Posting Yet On The Forum, Just Been Browsing And Gaining Ideas And Knowledge From You Guys....
At Last I Thought I Would Start My Own Build Thread...
I Bought The Car About 6 Months Ago Completely Standard With 99k On The Clocks, 2 Owners And Full VW Service History, This Is My Second Mk3, Im Only 19 And Had A 1.4 Match Before, All Was Great Except The Power, Then I Dreamed Of Getting A VR6 And Low And Behold, One Came Along Two Weeks Later, There Were Only 2 Bad Points About It, The Back Arches Had Bubbled Rust on Them ( Which I Have Read Is Quite Common ) And Secondly Another Patch of Rust Which The Previous Owner Informed Me Was A Stone Chip On The Rear Quarter.
Heres How It Started...
I Then Changed...
The Wheels ( Kept Them From My Old Mk3 )
The Front Indicators And Fogs
Coilovers
Front Splitter
Removed The Rear Wiper
New Pressed Plates
The Badges Were Looking A Bit Dated So Decided On A Colour Sheme And Got My Mate To Spray Them Up
Also The Engine Cover Is Sprayed The Same Colour.
This Is New How The Car Stands Except I Have The Rear Seats Out Ready To Board And Carpet it.
I Have Front And Rear Strut Braces In The Post But Due To Christmas Post They Arent Here Yet, They Will Also Be Getting Sprayed.
Bad News Some **** Decided To Not Check His Mirrors And Drive Into The Side Of Me Whilst I Was Overtaking Him, Hasnt Caused Too Much Damage But Still Takes The Piss....
Any Comments Will Be Great, Thanks
-
Thanks For That Mate, How Did You Make Sure That The Ply Was Level?
-
Looking Good Mate, Loving The Stripped Out Back Seats With It All Carpeted, Im In The Middle Of Doing Mine At The Moment, Got Any Tips And What Did You Use?? Thanks
-
A Very Tidy Example Of What Can Be Done WIth A Bit of Imagination, Really Liking The Colour Schemes...
Would Like Some Info On What Needs To Be Added/Removed For The Oil Breather Filter??
Thanks
Intercooler Pipe Route
in Engine Tuning
Posted
Ive been advised by a few people that its a good modification, im not all that clued up cars but i understand that colder/more dense = bigger power.
sorry Paul, whats a Sri?
thanks