removing the back seat in a five door and dash??

[jezmoz 0]

hows it done, i've read a few threads about the front ones having pins but can't see how the back ones come out, come to think of cant see hoe the front ones come out either? Also can anyone advice on the best way to approach removing the dash???

[Hoppa 0]

Not 100% sure yet but im taking the whole my interior (inc dash) out over the weekend so I will let you know. Think the back seat lower section is just held by the hinges.

[VR6Rich 3]

Front Seats:

Push them forward and underneath by the handle you should see a clip/pin that you need to press together to take out. Once you have done that you just slide the seat all the way back until it comes off of the rails. You might need to remove some plastic caps from the end of the rails.

Back Seats:

Bottom sections are removed by uncreawing the hinge which is just below the seat.

The rear sections require you to push down on a clip at the pivot point next to the doors. Once this is done you need to remove the clip in the centre hinge which was a real git to remove!

Hope this makes sense!

[jezmoz 0]

cheers hoppa maybe you could do a breakdown of the swap when you've done, it would help me out

[Hoppa 0]

Yeah no probs. Just waiting for my Mulberry to turn up - should be friday.

Take it your getting rid of the blue stuff too?

Cheers VR6RICH that should help me 2!

[jezmoz 0]

yeah can't stand it anymore!! looks odd with having a white car and black trim, then blue interior, what were they thinking???

[stockers 1]

the clips in the cnter of the seats are best removed using a slim flat ended screwdriver ,just prize them off using the metal bits they slot onto as e lever

[jezmoz 0]

cheers i'm gonna have a go at it!