andy_dale1993 2 Posted September 15, 2015 Report Share Posted September 15, 2015 Hi all, im totally new to this so bare with meI own a mk4 golf 1.4 8vJust bought a mk3 vr6 2.8 full donor car to do the conversion on my 1.4Now i have a question on the wiring side of things, does the loom split, engine, dash, front to rear ect ?Also ive read that in some cases the engine loom for the vr will plug and play into my 1.4 fusebox? That correct,? Is fo i wont have to change dash loom will i? Link to post Share on other sites
mattvr6 133 Posted September 15, 2015 Report Share Posted September 15, 2015 Easier to just buy a v6 4mo, mk3 vr6 mounts differently wiring side will be a ball ache for the hassle just buy a mk4 or good mk3 Link to post Share on other sites
daveyboy 897 Posted September 15, 2015 Report Share Posted September 15, 2015 I agree with Matt. It will go in with the v6 4mo engine mounts but then you'd have to get a 4mo gearbox with the mounts and obviously a transfer box blank then the wiring will be a piss on after that Link to post Share on other sites
andy_dale1993 2 Posted September 16, 2015 Author Report Share Posted September 16, 2015 Already bought the vr6 donor car, bummer, time isnt an issue i can take as long as neededThanks guys Link to post Share on other sites
andy_dale1993 2 Posted September 16, 2015 Author Report Share Posted September 16, 2015 Sorry guys just realised i wrote"I own a mk4 golf"I meant mk3 I own a mk3 1.4 8v and converting it to a vr6 2.8 Link to post Share on other sites
daveyboy 897 Posted September 16, 2015 Report Share Posted September 16, 2015 (edited) Oh well in that case Andy everything is just a straight swap. I'm not sure on the fuse box side of things tho. I think you'll have to use the vr6 clocks too.I'd say the easiest way to do the engine swap would be literally to unbolt the subframe with the engine, box and suspension all still attached to each other the bolt it all into the 1.4 shell. You'll also need the pedal box from the VR as I'd imagine the 1.4 will have a cable clutch and not hydraulic like the VR. Oh and possibly the shifter tower and rods/cables. I'd also use the rear axle too then you've got the rear discs from the VR Edited September 16, 2015 by daveyboy Link to post Share on other sites
andy_dale1993 2 Posted September 16, 2015 Author Report Share Posted September 16, 2015 I already have the rear disc conversion on Basicslly have everything converted apart from the engineHaha thanks Link to post Share on other sites
Recommended Posts