fuzzwaldo 1 Posted February 18, 2014 Report Share Posted February 18, 2014 hi i have a 97 golf vr6 with a 2.8 odb2 engine which i would like to swap for a 2.9 corrado 2.odb1 which i have had for a while i want to make it a 2.9 odb2 is ok just to swap the engine an use the odb2 wiring loom, is there anything else which will need to be change. i am looking to build the best engine possible from the two engines cheers for any help Link to post Share on other sites
daveyboy 897 Posted February 19, 2014 Report Share Posted February 19, 2014 Ive got a bare 2.9 and when I do the swap im just gonna use everything off my 2.8 engine so everything should be ok mate (I'm odb2 too) Sent from my GT-N8010 using Tapatalk Link to post Share on other sites
Levivr6 0 Posted February 21, 2014 Report Share Posted February 21, 2014 This is all so confusing! I have a mk3 golf vr6 1996 model, the engine has a coil but unfortunately the engine has blown up, but I have a 2.9 vr6 corrado engine but it has a distributor, will the mk3 golf loom plug straight into the corrado engine? Helppppp Link to post Share on other sites
Recommended Posts