twolf1 0 Posted February 8, 2014 Report Share Posted February 8, 2014 Got in me mk 3 this morning and switched the engine on and the dials made this funny sounds, reset back to zero then jumped up when I turned the engine on. Thought nothing of it until I switched the engine off and the dials stayed exactly where they were (engine temp, RPM, Speedo and petrol). Really bizarre, when i put my key back in and turn to "one" (engine electric on), it all shoots back to zero, re-sets then turn the key all the way to engine on and it goes back up to normal again. Does anyone know what this is. Also strange as the central locking also stopped working at the same time (cant hear the pump in the boot). Probable not connected in any way at all but just strange Any help would be soooooo appreciated Link to post Share on other sites
Lukey. 381 Posted February 8, 2014 Report Share Posted February 8, 2014 Sounds like you have a permanent live problem to the clocks Link to post Share on other sites
twolf1 0 Posted February 8, 2014 Author Report Share Posted February 8, 2014 What does this mean, need a new dash? Link to post Share on other sites
Lukey. 381 Posted February 8, 2014 Report Share Posted February 8, 2014 I don't know which wire it would be, it could be a break in that wire or sometimes PCB tracks can split, would best to first have a look and check everything out and test continuity Link to post Share on other sites
Recommended Posts