24V Conversion

[palmer 17]

Hi guys and girls, Hoping that some1 can help. Im in the process of fitting a 24v lump in the vento along with a mk4 dash so im using a complete loom out the mk4 4mo. My only problem is that i cannot find any wiring diagrams for the headlights and i need to cut the mk4 plugs off and fit the mk3 units. and the same with the rear end. A m8 has sent me a bentley maual pdf but i cant find anything on there to do with lights :-(......Any help would be greatly appreciated :-)

 

Many thanks, Lee

[Nex 17]

'borrowed' from E38, but is this what you were looking for ish

 

Pin -- wire colour -- item

1 -- gray/blue -- illuminations
2 -- white/black --
3
4 -- gray/blue thick --
5 -- black/yellow thick -- switched live
6 -- gray/red -- RH/sidelight/taillight
7 gray/green -- numberplate lights/rearashtray
8
9 -- brown -- earth
10
11 -- red/yellow -- live
12 -- gray/white -- rear fog
13 -- gray/yellow -- front fog
14 -- gray/black -- LH/sidelight/taillight

thats a pain to work out lol some missing

and then there the pin to pin
Mk4 mk3
1 --- 5
2 --- 4
3 ---
4 --- 2
5 --- 3
6 ---
7
8 --- 13
9 --- 12
10 --- 9
11
12
13 --- 14
14 --- 6
15 --- 11
16 --- 7
17 --- connect this to pin 16 on mk4 switch and the blue and gray sripe for alll the iluminations to pin 17

[Nex 17]

or something like this?

http://www.matey-matey.com/tech_diag.shtml

[palmer 17]

Sweet cheers Justin :-) shall give it a go at wknd