russj249 2 Posted July 27, 2013 Report Share Posted July 27, 2013 First of all I'd like to say Hi to everyone again after my VR has been off the road for most of the year so far! I figured its about time that I get it back out on the road and start using it as I built it to do!I've gone to start it after it's been sitting for a good few months. I thought I isolated the battery but seemed I didn't! So after 2 days with the battery on charge at work, I bought it back and still wont fire.I'm getting a "00546 Data Wiring Faulty / 27-00 - Implausible Signal" fault.If I clear the codes sometimes it starts, then just randomly and instantly cuts out. I have to re clear the codes then to get it to start. Sometime even after clearing codes it still wont start up and all I get is a clicking relay. I have no spark until I clear codes either.Now I've been onto measuring blocks and it says Key Recognised, but still wont go. Also done a few searches on here and on Google, but none of the posts have a definite confirmation of the fix.Is the simplest option going to be to send it to Stealth and have them erase immobiliser? And is this a guaranteed fix?I'm not bothered about the standard immobiliser being there as I have an aftermarket Cobra system anyway, and I fitted a remote central locking system anyway so the transponder chip is taped directly to the pick-up ring so I can use the mk4 style flip key. Link to post Share on other sites
Recommended Posts