Drizz 0 Posted February 25, 2012 Report Share Posted February 25, 2012 These are left over from my VR6 Polo conversion and wondered if anyone can help....This one is near the drivers side headlight, and has two pins, the black runs to a bizarre join (see second pic) and the other isnt joined to anything. Obviously was cut when we spliced the looms:Then theres this one on the passenger headlight loom:And im missing the header tank level if anyone knows what colours i should look for:Thanks in advance..... Link to post Share on other sites
v6horse 1 Posted February 26, 2012 Report Share Posted February 26, 2012 Hello mate . the top one could either be the double horn or the foglight . thats the only connectors near there on mine with this type . the horn should have 2 of these connected as its a double horn system atleast on mine . cant tell you what the otherone is as i dont have any that color on my headlight loom . Hope this helps a little Link to post Share on other sites
Drizz 0 Posted February 26, 2012 Author Report Share Posted February 26, 2012 I've got both fogs already fella, but thanks! The horn is on the passenger side loom and is connected but I will double check that as I've not tested the horn yet! Link to post Share on other sites
Recommended Posts