Andi 0 Posted February 20, 2012 Report Share Posted February 20, 2012 Im about to fit a AEM Wideband controler. But which gromet should i use to pass the cable through ?Cheers Link to post Share on other sites
michael5556 247 Posted February 20, 2012 Report Share Posted February 20, 2012 Any you can get to the other side of! Lol Most of the empty ones are on the passenger side. Link to post Share on other sites
russj249 2 Posted February 20, 2012 Report Share Posted February 20, 2012 Passenger side, behind the pollen filter under the scuttle trays.. remove the pollen filter and the plastic housing thing and you'll see it there.. comes out behind passenger airbag on left as you look up the dash Link to post Share on other sites
Andi 0 Posted February 20, 2012 Author Report Share Posted February 20, 2012 Is there any on the drivers side ? Link to post Share on other sites
russj249 2 Posted February 20, 2012 Report Share Posted February 20, 2012 I think there is, however by the time you've found the wires in the mess of the fusebox wires, you might aswell run it the longer way. I'm sure there is one though, just too many wires behind the dash drivers side for my liking Link to post Share on other sites
Andi 0 Posted February 20, 2012 Author Report Share Posted February 20, 2012 Cheers for the heads up, ill be giving it a bash this weekend. Link to post Share on other sites
Lukey. 381 Posted February 20, 2012 Report Share Posted February 20, 2012 theres a massive one near the abs pump, gaffer tape the wire to a metal bbq skewer and poke through, untape the wire and withdraw the skewer, there you go a self sealing hole, easy peasy Link to post Share on other sites
Recommended Posts