Justvr6 17 Posted August 24, 2011 Report Share Posted August 24, 2011 Hi guys wondered if anyone with a vr6 has suffered this fault and maybe able to help me??? Thank god it didnt happen at billing sat (130 miles from home)Car drives fine came back from meet sat. Went to move car next day no start. This did happen a few months ago but problem has never re ocurred, and car not being used everyday.No spark present and no fuel. Vag com cant access ecu.Checked crank sensor always appears common on sites but seems to be reading 530 ohms across pins two and three which is acceptable. Scorpion immobiliser still fitted from dealer from new with fobs and has always worked ok.Went to start after wiggling key in ignition switch and it fired up!BASICALLY SOUNDS SILLY BUT DO IGNITION SWITCHES GIVE PROBLEMS ON THESE VWS CAUSING CRANKING BUT A NO START????Cheers guys any help would be appreciated as although its running again i have no faith as not directly fixed or replaced anything.î„…Mmon Link to post Share on other sites
legvw 0 Posted August 24, 2011 Report Share Posted August 24, 2011 Yes ignition switches can wear out. Mine did, but only between ignition on and start. Link to post Share on other sites
Recommended Posts