hoppinmad 0 Posted July 23, 2011 Report Share Posted July 23, 2011 i have fitted my momo wheel today, all went smoothly and i didnt blow myself up with the airbag, but i dont know how to wire up the horn. the momo horn push has one connector on the back and the momo boss has a hole which i presume is for a wire to pass through, as people know the standard wheel uses a brass ring and brass tab set up, i cant see how iam going to sort it other than having long piece of wire coiled inside the boss*-)thanks,TY Link to post Share on other sites
legvw 0 Posted July 23, 2011 Report Share Posted July 23, 2011 You need to remove the back of the original steering wheel, the part that has the copper ring on, then that will have the wire for the horn on. There might be fitting instructions on the net. Link to post Share on other sites
hoppinmad 0 Posted July 23, 2011 Author Report Share Posted July 23, 2011 thanks for your reply, i did remove the piece with the copper ring and offered it up, but it looked like i would have to chop it up a bit to make it fit, thought i would see if any one else had any better ideas first, i will get started with the chopping i mean carefully modifyingTy Link to post Share on other sites
Recommended Posts