ian_GTI 0 Posted July 8, 2011 Report Share Posted July 8, 2011 Hi all I have finished all the wiring to my vr6 cabriolet conversation but u have a problem with the immobiliser so here goesFrom the vr6 it had a siemens (immo2) immobiliser box, but at some point in it's life it was decoded so i never had a chip in my key The cabriolet has a valeo (imm3) immobiliser box and the chip in the keyNow the car will start and then cut out because of the immobiliser faultI tried recoding it on vagcom with no successSo is the anyway of fitting the immo2 box back in or recoding it all to work as I would like to keep the immobiliser on it reallyThanks all Link to post Share on other sites
ian_GTI 0 Posted July 10, 2011 Author Report Share Posted July 10, 2011 Anyone? Link to post Share on other sites
Dave Lea 4 Posted July 10, 2011 Report Share Posted July 10, 2011 put the un coded 1 back on or it wont work with the other and then get a cheep after market imo Link to post Share on other sites
ian_GTI 0 Posted July 10, 2011 Author Report Share Posted July 10, 2011 No as simple as that, as they are different, and have different plugs so it's not just a stright swap Link to post Share on other sites
Recommended Posts