ashmk3 0 Posted March 7, 2011 Report Share Posted March 7, 2011 right well just after xmas i decided to break even with the vr as the floor was rotten and the sills, so i sold it, now i brought a mk2 gti 8v '91, at some point over this winter i want to drop a vr lump in it as i miss the noise, the torque and the power. so at the moment its a 8v gti and i need to buy coilovers however i dont want to buy two sets of coilovers, some now for the 8v then some later for the vr6. will mk3 vr6 coilovers fit direclty both front and back, and will they be to stiff with the 8v lump in? Link to post Share on other sites
gaz.veedub 0 Posted March 7, 2011 Report Share Posted March 7, 2011 yes mate mk2 and mk3 coilovers are the same and will fit on both but the top mounts are not so thats all you will need but i belive the mk3 VR ones have a thicker shocker shaft for the extra wight.but not 100% on this just what a mate told me but ive never had chance to compare them. Link to post Share on other sites
ashmk3 0 Posted March 7, 2011 Author Report Share Posted March 7, 2011 ahh thanks for this, so a good combination would be;mk3 vr coiloversmk2 top mounts Link to post Share on other sites
gaz.veedub 0 Posted March 7, 2011 Report Share Posted March 7, 2011 yes perfect. Link to post Share on other sites
Recommended Posts