Apollo 0 Posted October 22, 2010 Report Share Posted October 22, 2010 Ok after much searching I cant find the answer so here we go.I received some JOM bonnet lifters which are fine, however the screws that are supposed to replace the 3rd screw in the wing have a different thread.In other words the wing screws have a course self tapping thread and the JOM screws have a fine metric type thread.....any ideas people. Link to post Share on other sites
Rustyman 0 Posted October 22, 2010 Report Share Posted October 22, 2010 Whats the problem my JOM lifters came like this .. you just replace the forward most bonnet bolt Link to post Share on other sites
Apollo 0 Posted October 22, 2010 Author Report Share Posted October 22, 2010 The problem is that the JOM screws do not screw into the wing holes as they are two different thread types. The bonnet bolts are fine. Link to post Share on other sites
Rustyman 0 Posted October 22, 2010 Report Share Posted October 22, 2010 have you got pictures little hard to picture what you mean... in the wing there should be a plastic nub with the fine thread taps into also.. well did on mine... Link to post Share on other sites
Apollo 0 Posted October 22, 2010 Author Report Share Posted October 22, 2010 Am away now so no pix, cant see any plastic nub and the original wing screw is a self tapper. Link to post Share on other sites
danxs 0 Posted November 8, 2010 Report Share Posted November 8, 2010 my jom ones came with two sets of two. one fine thread set for the bonnet hinge. the other set are thick coarse thread and go into the wings Link to post Share on other sites
Apollo 0 Posted November 9, 2010 Author Report Share Posted November 9, 2010 Yeah I think they just put the wr0ng bolts in as a few people have said this. The box had been opened but as the guy was German he didn't really understand what I meant when I called him, anyway got a full refund and another set on the way with correct bolts. Link to post Share on other sites
Recommended Posts