bungy 2 Posted May 2, 2010 Report Share Posted May 2, 2010 I've been serching for a replacement but can't find anywhere with all three parts. I need the circular section for one end and the 2 piece oblongs for the other end. The only place found so far is in the USA. There must be somewhere in the UK that does them. Has anyone any idea's? Link to post Share on other sites
bungy 2 Posted May 2, 2010 Author Report Share Posted May 2, 2010 Managed to find this one as a complete unit but not with all three bushes on their own. http://www.awesome-gti.co.uk/product.php?xProd=13234&xSec=140 Link to post Share on other sites
legvw 0 Posted May 2, 2010 Report Share Posted May 2, 2010 I've got a spare dog bone mount if you want it mate? Link to post Share on other sites
bungy 2 Posted May 2, 2010 Author Report Share Posted May 2, 2010 Has it got bushes in or is it a bare mount? Link to post Share on other sites
legvw 0 Posted May 2, 2010 Report Share Posted May 2, 2010 I think its got them on both ends.. I'm 100% sure about the bushes on the oblong part, 50/50 about the other end. Link to post Share on other sites
bungy 2 Posted May 3, 2010 Author Report Share Posted May 3, 2010 Cheers for bringing that around today.... Link to post Share on other sites
bungy 2 Posted June 21, 2010 Author Report Share Posted June 21, 2010 Well I got on and got this done today. I used the newer mount that Paul gave me (cheers buddy) and powerflex bushed this newer mount and stuck it on. Noticed the difference on the first drive out after fitting.All you need to change is a 13mm and 16mm socket or spanner.The R32 mount all renewed with a powerflex bush.And fitted back on the car. Link to post Share on other sites
legvw 0 Posted June 21, 2010 Report Share Posted June 21, 2010 Tidy! Solid? Link to post Share on other sites
bungy 2 Posted June 21, 2010 Author Report Share Posted June 21, 2010 Noticeable difference when I drove it but then that could be partly to do with the old one being knackered aswell. (thanks again for the new mount, I owe you beer). lol. Also got my new low entry jack today. Should pull my finger out and get on and make my wheel ramps to match. Link to post Share on other sites
Recommended Posts