lowvr 0 Posted April 22, 2010 Report Share Posted April 22, 2010 i often see something along the lines of clean your maf....but what is the proper wayits obviously a delicate bit of equipment so i don't want to damage itthe car is odb1 which uses hot film sensor if that makes any differencethanx in advance Link to post Share on other sites
Ben Seabrook 4 Posted April 22, 2010 Report Share Posted April 22, 2010 remove it from the car and use Isopropyl Alcohol spray Isopropyl Alcohol or electrical contact cleaner - but pref the first one - spray all over the element leave to dry thoroughly and replace :) Link to post Share on other sites
xyber 1 Posted April 22, 2010 Report Share Posted April 22, 2010 Buy a new one Link to post Share on other sites
rodney 17 Posted April 22, 2010 Report Share Posted April 22, 2010 there may be a guide in the premium member section iirc Link to post Share on other sites
vr6stormt 0 Posted April 22, 2010 Report Share Posted April 22, 2010 there may be a guide in the premium member section iircyep there is along with some other useful tip`s...... Link to post Share on other sites
lowvr 0 Posted April 23, 2010 Author Report Share Posted April 23, 2010 thanx guysBuy a new oneits not that mine isn't functioning, i find it almost a blessing mine has lasted 16 years now so i thought to help preserve it i could attempt to clean it if the risk of damage is low Link to post Share on other sites
VR6-RR 0 Posted April 23, 2010 Report Share Posted April 23, 2010 Be careful you dont damage it, I just bought a new one for my 92 odb1 from VW £124, and they only have 4 left in the factory, meaning 4 left in the country. Link to post Share on other sites
lowvr 0 Posted April 23, 2010 Author Report Share Posted April 23, 2010 woah, not cool! Link to post Share on other sites
Recommended Posts